The charging and adding of the second oil is almost from Qingdao to Huangdao. The tunnel bus with the word “pure electric bus†is the first choice for many citizens. “Now it is no longer necessary to drive a diesel-powered vehicle that consumes oil and pollutes the environment. "The driver, Master Hu told reporters, "From the Sifang Station to Xuejiadao, 33 kilometers away consumes less than 40 degrees, which is much more economical than a fuel car."
What is more satisfying to Master Hu is that Shandong Power Group built the Xuejiadao Charging Station for only over six months, making charging a quick and easy thing: In the charging station's power exchange channel, high-speed machine vision technology is used to locate The robot automatically removes the battery from the car, puts it on the charging rack on both sides to start charging, and removes the already-charged battery from the charging rack and replaces it with the car. Replace the 6 batteries on a pure electric bus. The entire process takes less than 10 minutes.
It is such a convenient and rapid charging that the bus company in Daocheng City has accelerated the speed of the introduction of pure electric buses: starting from the first batch of 20 electric buses, it is now Qingdao Tunnel 2 Road, Tunnel 4 Road, and Huangdao Island. The bus company already has 38 electric buses in operation, and it is expected that 4 tunnel bus lines will be fully operated by electric buses during the year, and the number of operations will reach 120.
The same scene was also staged in Linyi. After the Linyi Jiaozhuang Electric Vehicle Charging Station was completed and put into operation in 2010, Shandong Power Linyi Power Supply Company has also built 4 charging and charging stations, namely Yiyuntang, Gongcun, and Liuqing, forming a “quadrilateral†electric motor in the urban area. Car exchange service network. The completion of “Saddle†directly boosted Linyi Bus Company to invest 100 pure electric buses into bus operations.
Now, Shandong Power Group has officially put into operation the first county electric vehicle charging station in Yinan County, connecting the service network of new energy vehicles from urban areas to rural areas. According to data from the Linyi Power Supply Company, as of the end of 2011, the Linyi electric bus had been charged more than 40,000 times, and the total mileage exceeded 5.6 million kilometers, equivalent to 140 orbits around the earth.
The charging network will be spread all over the province due to objective conditions such as insufficient battery life, limited fast charging technology, and large-scale popularization of charging and switching power stations. Although new energy vehicles have attracted attention due to their energy saving and environmental protection, they have not been widely promoted. . "The development of the electric vehicle industry cannot be hoped that the popularity of electric vehicles will precede the construction of charging stations. We must first make the 'road' smooth so that the vehicles can get through." For how to break new energy vehicles, deputy chief engineer of Qingdao Power Supply Company Chen Gang understood this way.
Nowadays, a more extensive “road†for charging stations for electric vehicles is being rolled out across the province: in the vision of Shandong Electric Power Group, it will be supported by the Jinan, Qingdao, Linyi and other nodes, with the Beijing-Shanghai, Jiqing high-speed Based on this, we will build an electric vehicle charging and replacing station in the service area and large parking lot, and construct Shandong “one vertical and one horizontal†backbone network for charging and replacing electricity.
This year alone, Shandong Electric Power Group will build 17 electric vehicle charging and switching stations in key cities such as Qingdao, Jinan, Linyi, Zibo and Tai'an, and will continue to build six, and assist in the construction of passenger car battery distribution stations and charging piles. By 2013, there will be 11 access charging and replacement service networks in 17 cities across the province.
It is also the first of Shandong's electric vehicle supporting service facilities, making our province currently running a total of more than 400 pure electric buses and electric passenger cars, with a mileage of more than 7 million kilometers. Among them, cities such as Linyi and Qingdao that have not been included in the pilot demonstration of new energy vehicles in the "Ten Cities Thousand Vehicles" have become the model for promoting electric vehicles nationwide.
Grid boosts the electric vehicle industry Perhaps for all new energy car manufacturers, Shandong Electric Power Group is the best solution for battery charging and swapping.
Shandong Electric Power Group focuses on charging, changing, storing and releasing various types of charging solutions for electric vehicles: the construction of the Qingdao Xuejiadao Exchangeable Storage and Storage Integrated Demonstration Power Station, the Xuejiadao centralized charging station, and the Jinan Yingxian Charging Station. Heroes charge and exchange station, Jinan West station charge and exchange station and Lincang Jiaozhuang, South Nanchong exchange station. Different construction plans for different cities across the province cover the full service network of electric vehicle replacement.
The strong ability to charge and swap electricity has attracted the nation's new energy vehicle makers, Shandong. With the completion of the Xuejiadao electric bus charging and switching station with the world's most complete functions, largest scale, and strongest service capabilities, Tianjin Lishen invested 3 billion yuan in power battery projects and settled in Huangdao District, Qingdao City. The urban and rural coverage of the Linyi Charging Station made the production of the Shandong Jiuxing electric vehicle in Linyi enter the capacity saturation state from the beginning of the 9th.
Shandong Electric Power Group expects that if the province is to form a scale of 100,000 electric vehicles, the battery output value will reach more than 10 billion yuan, and the direct output value of electric vehicles will also reach 100 billion yuan or more, if we consider the scale and leverage effect brought by the industry Affected, it will also pull up the extended output value of 200 billion yuan in related industries such as auto parts, electrical machinery, and electrical control.
More importantly, for the new energy automotive industry that is still in the early stages of development, the lack of uniform charging standards has become a bottleneck that restricts the development of the industry. The battery specifications of electric vehicles are not uniform, and the models and interfaces do not match the charging stations; charging Current electric vehicles require DC piles, while others require AC piles.
In this regard, Lu Qingchun, deputy director of the Institute of Automotive Research at Tsinghua University, said that if consumers find that electric vehicles have price advantages, they lack the necessary charging facilities and are inconvenient to use. They also retreat. This in turn will affect the enthusiasm of auto companies in developing and producing pure electric vehicles, leading to a vicious cycle. "The introduction of the national standard for electric vehicle charging will effectively boost the development of the electric vehicle industry."
0.8mm ( 0.031") Female Header Connector
Category:Board To Board Connectors
Sub-Category:Pin Header Female
Type:0.8mm
0.8mm ( 0.031") Female Headers Overview
Whenever there is a need for fitting small-sized connectors in compact devices, the 0.8mm pitch female header, or sometimes referred to as header connector, is ideally suited for this application. Not only does this female header space-savvy, but it is also designed for vacuum pick and place that makes it suitable for high volume automated manufacturing.
Antenk offers these low profile, easy-install, SMT or THM miniature female connector plugs at high quality and affordable China-quoted price, for board-to-board connection, snuggly fitting the pins of a male header and acting as a receptacle.
Assembly and service is simple with either vertical (straight), elevated or at a right angle configuration/orientation, which can dissipate current of about 1.0 A or less in a tape and reel packaging. The filleted corners can also remove shadowing allowing optimization of LED output.
Also, the 0.8mm pitch female headers are made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 0.8mm (0.031 inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.
Applications of 0.8mm Pitch Female Headers
Its small size is most suitable for PCB connections of small equipment and devices such as:
Arduino Boards
Architectural and sign lighting
Retail and display lighting
Fluorescent LED retrofit lighting
Cabinet or furniture lighting
Commercial / residential cove lighting
WiFi equipment
Gaming consoles,
Measurement instruments
Medical Diagnostic and Monitoring equipment
Communications: Telecoms and Datacoms
Industrial and Automotive Control and Test
Mount Type: Through-hole vs Surface Mount
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
0.8mm vertical single row female header, 0.8mm vertical dual row female header, 0.8mm Elevated single row female header, 0.8mm Elevated dual row female Header, 0.8mm right-angle single row female header and 0.8mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
0.8mm Right-angle Dual Row female header, 0.8mm SMT Single row female header, 0.8mm SMT Dual row female header and 0.8mm Elevated Dual Row female Header are Antenk`s SMT female headers.
Soldering Temperature for 0.8mm Pitch Female Headers
Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.
Orientation/Pin-Type: Vertical (Straight) and Right-Angle
0.8mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.
Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.
PCB Connector Stacking
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.
Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.
Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.
Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.
Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Custom 1.0mm Pitch Female Headers
Customizable 1.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
Female Header Connector,0.8Mm Female Pin Header,0.8Mm Female Header,0.8Mm Pcb Header, Pitch 0.8mm Board to Board Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com