Model NO.: GYTA53
Fiber Type: G652D,G657A,Om1,Om2,Om3,Om4
Operating Temperature: -40-70
Laying Method: Overhead, Pipeline
Number of Conductors: 0-144cores
Package: PP Bag, Carton or Customized
Color: Black
Trademark: SUNET
Transport Package: Carton
Specification: GYTA53
Origin: China
HS Code: 85367000
Model NO.: GYTA53
Fiber Type: G652D,G657A,Om1,Om2,Om3,Om4
Operating Temperature: -40-70
Laying Method: Overhead, Pipeline
Number of Conductors: 0-144cores
Package: PP Bag, Carton or Customized
Color: Black
Trademark: SUNET
Transport Package: Carton
Specification: GYTA53
Origin: China
HS Code: 85367000
GYTA53 Steel Tape Armoured with Double PE Sheath Optic Fiber Cable
 The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
If you are interested in our product , plesae feel free to contact us !
Â
GYTA53 Steel Tape Armoured with Double PE Sheath Optic Fiber Cable
 The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
If you are interested in our product , plesae feel free to contact us !
Â
PCB bus slot edge card sol: 1.27mm, 2.54mm, 3.175mm, 3.96mm, 90 degree, 180 degree dip plug-in board, SMT board, press type, welding type, ear, long pin series.
PCB bus slot edge card sol: 1.27mm, 2.54mm, 3.175mm, 3.96mm, 90 degree, 180 degree dip plug-in board, SMT board, press type, welding type, ear, long pin series
EDGE CARD SOLT
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com