You did not misread, it really is 17, can not afford to lose, can not be fooled, 17 to get the center and left and right speaker bracket. I just came back from a business trip. In order to complete it, I just fought my life. At the end of the month, I contributed all of my silver.
Home theater also has a single over the air, the price can be referenced:
The reason for this transformation is:
The position is not ideal, the left and right speakers are far away from the viewing position, the center speaker is a little bit off the screen
The second reason for the transformation:
Improve listening performance
The reason for the transformation of three:
Reason 4:
. . . . . .
Above all I just want to tell you, are shrimp eggs
The only real reason is that it is purely boring. The G20 Summit will soon be on the road, and it will be difficult to go out. The cars are limited to single and double numbers, and most of the factories are on holiday on the 24th, plus a pair of speaker frames worthy of the first two days. A few hundred oceans did not fit the spirit of being worth buying, so I went to the hardware store in the morning and bought materials.
The shrimp also ate, and the egg was torn again.
First, the material list1, three meters 40PVC pipe one (this can also choose 50, I mainly have 40 nylon rods)
Local 10 yuan to start
2, PVC glue
Local 2.5 yuan a vial (actually not needed)
3, wood screws
Local 2 yuan, to 30 (the results did not use)
4, saw blade
Local 2.5 yuan, 5 roots (only one result was used)
The following is not the price, are throwing away a lot of garbage and inventory
5, four pieces under the floor
6,40 nylon rod section
7, dumb round 3KG weight two (this throw corner for a long time, it is also considered waste, as long as the size is large enough, weight is heavy enough, anything can be used as a base)
8. Artificial (Some people will certainly say this, I just want to say that Idle is idle, and I have no place to earn extra blocks, so I do not charge the cost)
9, since the spray paint (this depends on personal preferences, like what color to spray what color, I will temporarily not engage in)
All the materials used are here
Contrast before and after the transformation (no interest, direct traffic to the province, of course, the incoming are coming in, please take the body of the broken silver are out of trouble, robbery)
Transformation of the former
After the transformation (if the original score is 30, you can now have 45, and still fail in anyway)
There is no such thing as a blueprint for such a simple design, and many DIYs I have come up with that (no culture is like this), including engraving machines, old lens remakes and so on played a few years ago. Of course, it will inevitably take more time.
I hope to give more thought to a friend in need. During the production process, the hands are dirty and they are just one person.
2.1, left and right bracket
Speaker board processing, digging down 4mm, desktop cot processing size is not large enough, torque is small, can only think of their own way, the first hit the hole in the middle fixed, but also cut into a similar circle with a cutting machine, the diameter is too large, Finally, it is still necessary to amend it and use it for no further polishing (people are lazy)
Nylon plug processing, a total of 18 processing, a slightly different size, almost the same
Holes, fits can be stained with sawed PVC pipe
The only mistake here was the base. The connection was changed. The plan was fixed with three wooden screws. The result was too compact. The key point was that the weights would be encapsulated. When I first bought it, I thought it was iron. Wrapped glue, fainted, if not this transformation, if passed on to my children and grandchildren will not be joke died. Later changed to M12 screw fixed.
Bottom plug combined photo
On the glue, we must remember to put the thread in when we put together, otherwise the line can only be bare outside.
Left and right speaker bracket final product
2.2, middle bracket (to improve the height, the original file stalls)
The bottom floor and the bottom floor were lazy again. The original plan was to turn the sides into arcs. The result was a few cuts of the knife.
The middle pillar with a good plug
It's a bit ugly to see this
Although difficult to see, the quality is still guaranteed, the 75kg seat went up for a try, it is very strong
So far this DIY work has come to an end, the appearance is still very room for improvement, because my speaker chassis is round, I made a round, if you are a long party, you can feel free to I changed my copyright fee.
3.1 Why Buy
This basic needless to say, value friends also have a few sun bills, the general response to the starting price, after saying that under the big discount, there is no way to make concessions, plus the appearance is also very unique, or worth buying of. Having watched hundreds of movies, you can also come and scribble two sentences. Just for the article to end, continue.
The top of her breasts couldn't be found on the east. There was no more on Amazon. As long as S25, put this, and there was a difference between the two.
3.2, show the length of the scrap
Central speaker unit (I guess the designer who designed this is definitely a robot fan)
Dust cover, magnet pull
Surrounding four is a kind of small, or a little weight
Aluminum base
unit
Metal dust cover, great texture
Please ignore the base of the slag hand
3.3, some personal views on the speaker
This DIY solves some of the problems above, and revisited the fury that generally responds to good sound effects. After a slight improvement in the presence of the contrast, it is not surprising that one or two cold guns will come and go. Jumped.
Zhongyin’s vocals are clearer, and it’s also worth living around.
More than a thousand prices are worth listening to. (Of course, the domestic sales price is much more optional, you can see more), this guy seems to be not very good push, it is estimated that my amplifier is not very right, in order to better effect the volume to the minimum More than 65%, fortunately in the countryside, or else have to let go of fish, will be complained
There are conditions or more improvements in the space above it, I did not make any changes in this room, over-regular, obviously feel more bass when the sound becomes chaotic, spurious, it should be professional people say standing wave it . Sound insulation is not ideal.
It is better to upgrade the equipment than to upgrade your personal views. If you are tossing, you plan to work hard in this area.
Wooden ear can not tell a metaphysical out, will see it
Home theater you deserve to own
End with fury
IGet Legend,IGet Legend 4000,IGet Legend 4000Puffs,IGet Bar,igetbar 3500puffs eifbar bc 5000puffs
Nanning Nuoxin Technology Co., Ltd. , https://www.nx-vapes.com