Simple electric incubator circuit diagram

The device has low cost, simple manufacture, high reliability and high precision (plus or minus 0.3 degrees, depending on the sensitivity of the electric contact thermometer ). A person with a slight electronic technology base can install it and have a power failure alarm. After the power failure, the biogas, charcoal and hot water can be heated. If the actual temperature exceeds the required temperature, the alarm will sound. This thermostat is suitable for large, medium and small electric incubators and various thermostats.

This article refers to the address: http://

The specific circuit is shown in the figure, and the working principle and production of the constant temperature device are as follows.

When the 220V power supply is turned on, the thermostat is in a warming state. Power Transformers

Nuts

General materials of hot dip galvanized Screw Bolt nut is Q235 ,35K ,45# ,35CrMo,etc.According to the engineering requirements, the corresponding different grades Screw bolt nut are selected respectively .Generally ,the high-grade Nut products such as 35K,45# C35CrMo are prreferred for UHV lines, Mainly include :

1) High strength Nut

2)35 Crmo Nut

3) Thinckening of Nut

4) Enlarged bore Nut

5) Fine buckle Nut

6)Slotted Nut

7)Flange Nut

8) Lock Nut


According to strength grades ,there are 4,6,8,8.8,10.9grade ,for construction of differeent fields ,can use hot dip galvanized Flange nut ,Helix nut ,or other nuts .


Flange Nut,Carbon Steel Nut,Lock Nut,Stainless Steel Nut,Helix Nut

BAODING JIMAOTONG IMPORT AND EXPORT CO., LTD , https://www.chinagroundscrew.com