STP Series 48V2000A Electrolysis Power Supply

• Model NO.: STP 48V2000A
• Warranty: 1 Year
• Input Voltage: 380V
• Starting Mode: Self-excited Switching Power Supply
• Power Supplying System: Terminal Power Distribution Equipment
• Modulation System: PWM
• Output Voltage: 0~48V
• Circuit Mode: Constant Voltage / Constant Current
• Output Display: LED or LCD
• Remote Control: 0~10V / 4~20mA Analog Signal Control / PLC / RS Po
• Color: Ral7035
• Trademark: IdealTek
• Specification: HF transformer, filter, IGBT
• HS Code: 85044019

• Output Type: Single
• Output Power: 96kw
• Connection Mode: Parallel Switching Power Supply
• Voltage Regulating Mode: Width Modulation Type
• Energy Transmission: One-way Transmission
• Brand: Idealtek
• Output Current: 0~2000A
• Output Setting: 10-Turn Potentiometer
• Protection: Ov, Oc, Oh, Lack Phase, Short
• Cooling Method: Forced-Air Cooling / Water Cooling
• Application: Elelctroplating, Mao, Anodizing, Heating
• Transport Package: Plywood Packing
• Origin: China

Brief Introduction

STP Series Power Supply is specially designed for electroplating process of various kinds of metal, such as zinc, copper, tin and gold etc.
It has high frequency transformer, rectifer and PWM technology to ensure stable low output voltage and high output current for electroplating needs, it is featured for good reliability, high efficiency, small size and various control methods, it also could be used for other application like oxidation, water treatment and anodizing etc.

Features

1. Advanced soft-switching technology and multi-loop control adopted to ensure output precision & stability.
2. High-power isolated gate bipolar IGBT & Nano scale material high frequency transformer adopted.
3. Output voltage & current separately adjustable.
4. CC voltage-limit / CV current-limit working modes, manual-switchable.
5. High efficiency, full protection functions, like lack phase, over voltage, lack voltage, short-circuit, over current and over heat protection 
6. Small size & Low weight
7. Optional functions:
    a. DSP control, analog control.
    b. N+1 redundant system for high-power application and convenient maintenance
    c. Pulsing output
    d. Polarity reverse function
    e. Output timing


Applications

1. Electroplating
2. Electrolysis
3. Oxidation
4. Heating
5. Water treatment


General Technical Specification
 Custom-made requirements acceptable.

N+1 redundant system description (500V250A example)
 
A. Advanced current mode control & N+1 power redundant design adopted for whole power system, this control mode gives good current-sharing effects, low deviation and high CC/CV precision.
B. This power supply adopts N+1 redundancy system; the power cabinet has five units inside
    Total rated power is 500V250A, rated power of every unit is 500V62.5A, each power unit has 62.5A rated output current.
    Taking redundant into account, total real output power is 500V312A, real output power could reach 156KW which has 125% over-loading ability, total efficiency will be no less than 90%.
C. Fault of any-one unit would not impact the whole power supply; the other power units would compensate power loss and keeps output capacity.
D. You could repair & replace the faulty unit without power absence, you could continue with the remaining power units.


Main Components & Advantages
 
1. IGBT: Infineon (the original Siemens) IGBT module.
2. Three-phase bridge rectifier: SANREX bridge rectifier.
3. Main Transformer:High-frequency Nano crystalline transformer. The transformer is a case type structure. This case is not only the protective layer, but also the output of the transformer, and it also can provide cooling water channel. Another advantage is its large conductive area, small heat. Because the transformer adopts the novel structure, the conformity of production produced is high; it is especially suitable for high power supply manufacturing.
4. Output rectifier diodes: AN (original Motorola) Schottky.
5. Heat sink: Good quality aluminum panel, thickness up to 42mm
6. Output copper bar: 99.9% non-oxidation red copper, designed flow ability beyond 2.5A/m2
7. Cooling water pipe: RIFENG aluminum plastics compound pipe
8. Breaker: Schneider air circuit-breaker
9. Allowance: suitable power allowance for long-term continuously working.
10. Cabinet: 2cm thick good cold-rolled sheet with powder coating for cabinet making, protection degree reaches industrial IP56 degree.

 
 
 
Maintenance
 
1. Check whether the bolts or moisture loosen regularly
2. Check whether water leakage at pipe connection regularly
3. Check whether any leaking of water pipe connection regularly.
4. Regularly open the box side plate, cleaning dust inside.
5. Regularly with clip-on ammeter check three-phase input current that it is abnormal and serious drift phenomenon, if abnormal, contact the supplier in time.
6. Specially assigned person for equipment maintenance.

Application case


Storage
Pay attention to the following points during temporary & long-term storage.
1. Store the power supply in our packing box
2. Long-term storage would lead to electrolytic capacitor degradation, it should be powered up yearly, at least 5 hours power-on time, input voltage should be increased to rated value by voltage regulator.  

Warranty
1. The warranty period of this product is 12 months, free repair within warranty period except for man‐made damages or irresistible forces.
The following cases during under warranty are not included in free-warranty scope:
(1). Incorrect operation & maintenance of the power source that cause fault.
(2). Natural loss of consumable material (shell, connector etc.)
(3). Manual damage caused by modification or dismantle
(4). Damage caused by external equipments or third-party product or plug-in units.
(5). Force majeure factors, such as fire, flood or input grid abnormal.
(6). Unilateral amendment or modification on our LOGO or part number.
(7). Fault caused by abnormal usage of power source.
(8). Other non-product quality causes
2. Reasonable maintenance & repair costs should be charged after warranty period.

Product categories of Steel Tubular Pole , we are specialized manufacturers from China, Galvanized Steel Poles , Galvanized Tubular Poles suppliers/factory, wholesale high-quality products of Steel Tubular Pole Tower R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

we also provide 30ft Galvanized Steel Pole, Hot Dip Galvanized Pole , Hot Dip Galvanized Steel Pole.

a) Since 2001

b) Location: located in the beach of scenic and rich Taihu Yixing with good transport service.

c) Total Staff: 136 people

d) Certificate: ISO 9001:2008, ISO 14001:2004, OHSMS idt OHSAS 18001 and 500KV power transmission line tower production license

e) Equipment: ranging from angle bar fabrication, plate fabrication, drilling hole, bending, gas/plasma cutting to welding. Besides, we can galvanize by ourselves with 2 Zinc Baths. Our annual maximum capacity amounts to 100,000 tons.

f) Anti-Corrosion: Hot-dip galvanization as per ISO 1461 or ASTM A123.

g) Welding: CO 2 welding or Submerged arc auto methods.

h) Products: power transmission steel tower, telecom steel tower, TV/radiobroadcasting steel tower, drilling well tower, and similar steel structures for substation,plant workshop etc.

i) Experiences: Bangladesh(Desco), Sudan, the Philippines(Transco), India(Reliance), SriLanka(Lanka Bell), Indonesia(PLN),Ghana, Sierra Leone, Tanzania, Ethiopia.

Our motto is: Quality is the life blood of the company, therefore, We have been making every effort to provide high quality Galvanizing Steel Pole .

Galvanized Steel Pole

Galvanized Steel Pole, Galvanized Steel Light Pole, Galvanized Steel Electric Pole, Galvanized Steel Street Pole,Galvanized Steel Poles,Galvanized Tubular Poles,30ft Galvanized Steel Pole,Hot Dip Galvanized Pole,Hot Dip Galvanized Steel Pole

YIXING FUTAO METAL COMPONENT UNIT CO.,LTD , http://www.chinasteelpole.com