TCL's LED LCD TV sales increased by 39.96% in the first quarter

[High-tech LED News] TCL Group recently released its first quarter 2011 financial report. According to the financial report, the company's total operating income in the first quarter of this year was 13.374 billion yuan, of which sales revenue was 13.037 billion yuan, a year-on-year increase of 12.14%. The company achieved a net profit of 223 million yuan, a year-on-year increase of 245.34%. Among them, TCL Group has made financial provision for the pre-announced European litigation settlement program in the first quarter, and the impact on the company's net profit in the first quarter of 2011 was approximately RMB 30.02 million.

Sales of TCL Group's 2010-2011 color TV business (unit: thousand units)

The company's comprehensive gross profit margin in the first quarter rose by 1% year-on-year. Among them, color TV profitability is still recovering. In the first quarter, the gross profit margin of color TV domestic sales increased to 21.8%, the operating profit margin rebounded to 4.3%, and the product structure continued to improve. The sales of LED backlight LCD TVs were 205,000 units, accounting for the total LCD TVs. The sales ratio increased to 39.96%.

In order to expand the development opportunities of overseas market demand, TCL Group also launched a series of LED-backlit LCD TVs, including V6200, E5200, P51, D3200, etc., and successfully introduced LED-backlit LCD TVs to Brazil, India, Russia and the Middle East. .

Resin Sand Casting

Die casting is the pressure of metal molds on a die casting machine and is the most productive casting process. Die-casting machines are divided into two categories: hot-chamber die-casting machines and cold-chamber die-casting machines. The hot chamber die casting machine has a high degree of automation, less material loss, and higher production efficiency than the cold chamber die casting machine. The aluminum alloy die castings that are widely used today can only be produced on cold chamber die casting machines due to their high melting point. The main feature of die casting is that the molten metal fills the cavity under high pressure and high speed, and is formed and solidified under high pressure. The air in the cavity is wrapped inside the casting to form subcutaneous pores, so aluminum alloy die castings should not be heat treated, and zinc alloy die castings should not be sprayed on the surface (but can be painted). Otherwise, the internal pores of the casting will expand due to thermal expansion and cause the casting to deform or bubble when the above-mentioned treatment is performed. In addition, the mechanical cutting allowance of die castings should also be smaller, generally around 0.5mm, which can not only reduce the weight of castings, reduce the amount of cutting to reduce costs, but also avoid penetrating the surface dense layer and exposing subcutaneous pores, causing The workpiece is scrapped.

Resin sand molding,Resin Coated Sand Mold Casting,Furan resin sand casting,Green sand casting

Tianhui Machine Co.,Ltd , https://www.thcastings.com