2017 China IOT Technology Innovation Award nomination: Kunpeng Technology Wi-Fi2.0 Technology

What are the four difficulties in wireless network coverage in high-density scenarios? 1. In a high-density scenario, an ordinary AP cannot solve the problem of hundreds of people accessing the Internet at the same time; 2. The existing venue usually has wireless coverage, but it cannot solve the problem of active Internet access in the venue, and the original wireless coverage becomes a source of interference. 3. The bandwidth resources of the venue are insufficient, and there are too many people to access the Internet; 4. The wiring is complicated and the cost is high.

These pain points ignited the determination of Kunpeng Unlimited Technology to develop WIFI2.0 technology. Zhang Lipeng, CEO of Shenzhen Kunpeng Wireless Technology Co., Ltd. said that the team has built a complete wireless network coverage solution from dozens of people to tens of thousands of different scenes with WiFi2.0 products as the core. One WiFi2.0 product can support up to 512. Client access, through the simple and fast connection of multiple WiFi2.0 products, can effectively solve the pain point of "the more people there is, the more difficult the WiFi is."

Eight-band wireless access point N6800

parameter:

Model: N6800

Frequency range: eight frequencies (4 groups of 2.4G, 4 groups of 5G)

Antenna type: built-in eight antenna

Antenna gain: 3dBi

Transmitting power: 24dBm

Transmission rate: 4800Mbps

Network interface: 1 Gigabit Ethernet port

Power supply: 12V DC/50V POE

Communication protocol: IEEE802.11a/b/g/n/ac

Belt capacity: 512

Covering radius: 30m (empty and unobstructed environment)

Features

· Support 4 groups of 2.4G and 4 groups of 5G networks at the same time

· Support 256 terminal concurrent

· Support 8 groups of 2 & TImes; 2 MIMO wireless architecture

· Support WPA-PSK, WPA2-PSK, WPA-PSK+WPA2-PSK

· Three encryption modes, safe and secure

· Support 8 groups of channel SSID Vlan, divide Vlan for different channel SSID, improve network security

· Support Chinese and English SSID, SSID independent setting and hiding

· Support wireless roaming, experience a better network on the move

· Support independent setting of signal strength and channel to easily avoid interference

· Support intelligent AC management to achieve one-click upgrade, centralized management and maintenance of AP

· Support multiple installation methods for ceiling, wall hanging and tripod

Industry leadership

· Kuangpeng has unlimited insight into the Wi-Fi industry and introduced multi-band Wi-Fi 2.0 technology. A single machine can work at 8 independent frequencies and serve hundreds of people at the same time. The high concurrency experience of the product is several times more powerful than its flagship counterpart. The technology is innovative in hardware/antenna/software and has received dozens of patents.

Key points of innovation:

· Super material directional antenna design;

· Array type multi-antenna design;

· 2.4GHz ultra narrow band filter design;

· Wi-Fi multi-channel load balancing and roaming algorithms;

· Wi-Fi multi-band multi-channel composite wireless bridging algorithm;

· Distributed wireless star-based automatic networking algorithm based on Wi-Fi;

· Wi-Fi algorithm star wireless network link based on the best path.

Shenzhen Kunpeng Unlimited Technology

Shenzhen Kunpeng Unlimited Technology Co., Ltd. was established in 2016 and is headquartered in Shenzhen Nanshan Software Industry Base. It is a new generation of global leading wireless network solution service providers. Focusing on the innovation and research of Wi-Fi2.0, Wi-Fi is a new generation of wireless network technology. It integrates product development, production, consulting, sales and service. It has Wi-Fi2.0 NRadio brand full range of wireless access points and switches. Products such as core routers provide one-stop wireless network solutions for wireless network coverage, Wi-Fi operation and wireless network consulting services.

2017 China IoT Conference Introduction

The China IoT Conference was held by Huaqiang Jufeng's Million Electronic Engineer Platform Electronic Enthusiasts Network. The conference has been successfully held for 3 sessions. In the form of “Grand Forum + Sub-forum”, 100+ global famous manufacturers have gathered and successfully attracted 6,000+. The names of electronic semiconductor practitioners signed up for the event, affecting 200,000+ electronic engineers.

We are committed to guiding China's IoT wind vane, gathering global IoT industry leaders, analyzing the potential market value of various industries, exposing the latest technology solutions, providing the best communication platform, and striving to build an IoT ecosystem with many partners.

Time: December 6-7, 2017

Location: Shenzhen, China

Expected size: 2,000+

Conference planning:

Morning of December 6th: IoT Development Summit

Afternoon of December 6th: Four Technology Forums (Sensors, IoT Security, Power Management, Artificial Intelligence) + Seven Application Forums (Smart Home, Wearables, Smart City, Smart Lighting, Smart Machines/Unmanned Vehicles, Industrial Products) Networking, smart car)

Evening on December 6th: Awards Ceremony, Strategic Cooperation Exchange Dinner; during the dinner: New CEO Award (10), Technology Innovation Award (20), Product Golden Lion Award (30)

Morning of December 7: Analyst Breakfast Meeting, IoT Investment Forum

Flat Mirror

Hanzhong Hengpu Photoelectric Technology Co.,Ltd , https://www.hplenses.com