High Quality UK Standard Extension Socket with LED Light

Posted on

  • Model NO.: SZ-SN01
  • Type: With Switch
  • Hole-Digit: 3 Digits
  • Color: Colorful, Can Be OEM
  • Customized: Customized
  • Material: PVC/PP/ABS Body 3 Cores PVC Cable
  • Cable: 1m/2m/3m/5m Can Be OEM
  • Delievry Time: 20-35dyas
  • Trademark: SANZU
  • Grounding: Standard Grounding
  • Application: Commercial, Industrial, Hospital, Residential/General-Purpose
  • Cable Length: OEM
  • Certification: RoHS
  • Condition: New
  • Model: 3way,4way,5way
  • Place of Origin: Wenzhou, China
  • Port of Loading: Ningbo/Shanghai
  • Origin: Zhejiang China
High Quality UK Standard Extension Socket with LED Light

3way, 4 way, 5 way available

Color design, more popular

Wire: 0.75mm/1mm both available, 1M, 2M, 3M, 4M, 5M length can offer, copper inside

Packing: blister package/PVC bag with head



Name Iraq High Quality Extension Socket with Protection Gate
Material PVC/ABS body case
Cable Rating 3 cores PVC cable or as your request
Fuse used 13A,BS 1362 Cartridge fuse
Test  Standard BS 1363

Flicker Free Led Driver

Flicker Free Led Driver


Light strobe, even when the radiation is still life, the naked eye can not detect the strobe, but also prone to visual fatigue, damage vision.

If it is to observe the moving objects (especially faster) and in the light under the fine work, not only depending on the material is unclear, the greater the damage to the eyes.

Questions about flicker-free light may arise at this point. To be fair, it should be pointed out that fluorescent tubes operated with conventional or low loss ballast also flicker at 100 Hz and the light output is reduced at lower ambient temperatures. Fluorescent lamps operated with an ECG, including energy saving lamps, work at 44 – 50 kHz so that the lamps normally do not flicker. In reality, however, things are a little different. While a higher switching frequency is used, the input capacitors are to small for cost reasons. This causes the high frequency circuit in the lamp to be supplied with a strongly pulsating voltage. This pulsation creates a brightness modulation in the emitted light which is why these lamps often have a rather high level of flicker at 100 Hz.


Features:

  • Input: input voltage range: 100-240Vac, max input voltage range: 100-347Vac.
  • Output: output power range: 24W-30W; output voltage range: 25-40Vdc.
  • Active power factor correction, high PF (PF> 0.95 at 230Vac), low THD (THD <15%), the efficiency can up to reach 91%.
  • Flicker-free coefficient<0.4%.
  • Meet the ERP standards after being installed inside finished LED lights.
  • Open circuit, short circuit and over temperature protections.
  • Surge level: 2KV.
  • Structure: IP20 (screw terminal version).
  • Warranty: 5 years
  • Applications: LED down lights, panel lights, grid lights, track lights and etc.
Technical data:
  • Input voltage:100-277V AC, 47 to 63Hz
  • Output specifications (a):
  • 1)25-40Vdc 600mA 24.00W
  • 2)25-40Vdc 650mA 26.00W
  • 3)25-40Vdc 700mA 28.00W
  • 4)25-40Vdc 750mA 30.00W
  • 5)25-40Vdc 1100mA 44.00W
  • 6)25-42Vdc 1300mA 54.60W
  • 7)25-40Vdc 1500mA 60W
  • 8)25-40Vdc 2000mA 80.00W
  • Conversion efficiency: 90% at 220Vac
  • Power factor: 0.97 at 220Vac
  • Ripple voltage: ≤1V
  • Current tolerance: ±5%
  • Protective functions: open-circuit and short-circuit
  • Operating temperature: -30 to 50°C
  • Humidity: 20 to 90% RH
  • MTBF calculation: up to 50,000 hours lifespan
  • Certificate: CE, CB, TUV, RCM certified


Flicker Free Led Driver,Non Flickering Led Lights Driver,How To Stop Led Flicker

ShenZhen Fahold Electronic Limited , https://www.fahold.net