Milpitas, CA (MILPITAS, CA) and Norwood, MA  (NORWOOD, MA) Analog Devices  (Analog Devices, Inc., ADI)  (Linear Technology Corporation) Introduces an enhanced version of the LTC2862  LTC2862A, LTC2862 is ±60V  Tolerance  The RS485/RS422 transceiver was introduced a few years ago and has been widely adopted. These two half-duplex transceivers are designed for cross-line faults, ground voltage faults or lightning-induced surge voltages on the actual  The RS485 system provides protection from field failures without the need for costly external protection devices that can cause overvoltage conditions that exceed the absolute maximum ratings of typical transceivers. Both devices are in  3V to  Operates within 5.5V supply voltage range while maintaining compliance  TIA/EIA-485-A standard requirements. However, the LTC2862A  Higher performance specifications, including an unprecedented ±40kV mannequin  (HBM)  And IEC Level 4 ESD ratings, thus improving ESD protection and noise immunity compared to its predecessor, providing greater ruggedness and signal integrity.
The LTC2862A provides very useful protection and reliability for a wide range of RS485/RS422 applications, including industrial control, instrumentation networks and automotive electronics applications. LTC2862A, whether the circuit is transmitting, receiving, in standby or power down  Can withstand ±60V  Any voltage within it will not be damaged. Extended ±25V  The input common-mode range increases operational reliability and extends functional effectiveness to environments with high common-mode voltages. The fully symmetrical receiver threshold ensures good duty cycle symmetry at low signal levels, and additional filtering capability prevents errors due to high frequency noise, providing optimum fail-safe operation. Significantly improved  ESD protection capability allows  The LTC2862A accepts ±40kV HBM (IEC-61000-4-2 ESD Level 4: ±8kV) on the transceiver pins without latch-up or damage; all other pins are protected from ±15kV HBM. The LTC2862A also provides ±5kV protection for electrical fast transients (EFT) with IEC 610004-4 EFT Level 4.
The LTC2862A is available in two data rates: fast 20Mbps LTC2862A-1 and low  EMI 250kbps LTC2862A-2. Both devices are available in commercial, industrial, automotive and military temperature grade versions.  SO-8 and  3mm x 3mm DFN-8 package. 1,000 pieces of the purchase price for each piece  2.35 US dollars. For more information, please log in  LTC2862A
Performance Summary: LTC2862A Â Â Â Â Â Â Â Â Â Â Â Â Â Â
? To provide  ±60V overvoltage line fault protection
? 3V to 5.5V supply voltage ? 20Mbps or low EMI 250kbps data rate? Interface pin provides  ±40kV HBM ESD, available on other pins  ±15kV
? Provided at the interface pin  IEC Level 4 ESD and  EFT protection
? Enhanced fail-safe receiver and noise immunity
? Extended common mode range: ± 25V
? The receiver is guaranteed to fail-safe operation
? Providing military (MP  Level) selection (–55°C to 125°C)
? industry standard pin layout
The quotes given in this article are for budgetary purposes only. Quotations around the country may vary depending on local tariffs, taxes, fees and exchange rates.
Voom Iris Mega Vape is so convenient, portable, and small volume, you just need to take them
out of your pocket and take a puff, feel the cloud of smoke, and the fragrance of fruit surrounding you. It's so great.
We are the distributor of the Vapesoul & Voom vape brand, we sell vapesoul disposable vape,vapesoul vape bar, voom vape disposable, and so on.
We are also China's leading manufacturer and supplier of Disposable Vapes puff bars, disposable vape kit, e-cigarette
vape pens, and e-cigarette kit, and we specialize in disposable vapes, e-cigarette vape pens, e-cigarette kits, etc.
voom iris mega vape pen,voom iris mega vape disposable,voom iris mega vape device,voom iris mega vape box,voom iris mega vape travel kit
Ningbo Autrends International Trade Co.,Ltd. , https://www.vapee-cigarettes.com