New distributor: GarageLab (Doral, FL)

Posted on

We are happy to welcome GarageLab as a Pololu distributor! GarageLab, located in Doral, FL, is the US branch of our Brazilian distributor Laboratório de Garagem. They carry a wide range of Arduino, microcontroller, and robotics-related products, including their very own Arduino-compatible Garagino.

For distributors in your area, you can check out our complete list of almost 200 distributors.

    Previous post
  • New products: 10-20 AWG and 20-30 AWG wire strippers

    New products: 10-20 AWG and 20-30 AWG wire strippers

    by Ben - 24 April 2014

    Inevitably, if you work with electronics long enough, you will encounter a wire that is too long, too insulated, or too connected (to the wrong...

    Next post
  • Maker Faire demo: automated treasure chest with jrk motor controller and linear actuator

    Maker Faire demo: automated treasure chest with jrk motor controller and linear actuator

    by Claire - 25 April 2014

    This blog post is part of a continuing series of blogs about the demos that Pololu displayed at our booth at Las Vegas Mini Maker Faire 2014. For...

Miner Accessories


Immersion Cooling is a technique used to cool components of IT equipment that consists of submerging the computer components in a thermally conductive and dielectric liquid. Through this practice, the servers are cooled and heat is transferred from the source to the liquid.

When we talk about Immersion Cooling, we also need to discuss the different types of Immersion Cooling, as well as the applications of Immersion cooling. The practice of Immersion Cooling has a multitude of benefits particularly as it allows datacenters to be managed in a greener and more sustainable manner. Environmental concerns has been a huge catalyst for the adoption of the technology in recent years.


With Immersion Cooling the heat is transferred directly from the heat source to the working fluid. In [watercooling" the working fluid is potentially harmful to electronics and thus flows through a sealed loop isolated from the heat source. A watertight waterblock is used to indirectly transfer the heat from the heat source to the working fluid. With Immersion Cooling the working fluid must be non-conductive and that generally limits us to four families of fluids:

deionized water
mineral oil
fluorocarbon-based fluids
synthetic
Immersion Cooling systems used to have a higher fluid cost than water cooling, but this is already changing.

A wide variety of liquids exist for this purpose, the most suitable being transformer oils and other electrical cooling oils. Non-purpose oils, including cooking, motor and silicone oils, have been successfully used for cooling personal computers


water cooling,oil cooling,immersion cooling box,liquid immersion cooling,apw12 power supply

Shenzhen YLHM Technology Co., Ltd. , https://www.apgelectrical.com