Tesla CEO Musk: Redefining Model 3 Production Planning Model

Recently, news about Tesla has been frequently seen in our ears, such as the latest Model 3 exposure, ModelX recall, the breaking of the new factory and the introduction of the Model S. At the same time, Tesla CEO Elon Musk has been on Twitter to answer questions about Model 3 and to give a lot of information that has never been mentioned in the press conference.

Below, let us briefly summarize the "egg information" about Model 3:

1. Does the Model 3 after production have a traditional dashboard?

will not. A Tesla spokesperson made it very clear: "This is not a demonstration car, but a real engineering prototype. In fact, we are already using this prototype for linear acceleration testing, and I hope very much. We can finally put it into mass production. After all, we only have one and a half years left, and we must continue to push it forward as much as possible."

However, we are still expected to see the emergence of the HUD option package in future production models. Moreover, Tesla recently dug up Porsche interior designer Felix Godard, who designed the holographic display from the center of the front row to the front passenger seat for the concept model MissionE. ". This interactive system can be controlled by gestures, and it can create 3D effects and support many applications.

2. Will the steering wheel design change?

A number of interested consumers have noticed that Tesla has configured a flat motion steering wheel for the Model 3, but there are few buttons on it, which is very rare in today's new cars. Fortunately, this is not a reduction in Tesla's cost savings. Musk revealed: "When you see the real steering wheel and control system of Model3 in the future, you will find it is like a spaceship."

3. Will the Model 3 trunk design be optimized?

Model 3's trunk design and opening scheme seems to have been rumored and complained by many consumers on social networks, and some users even call it "the biggest design failure in Model 3" on the website.

It is reported that because of the design of the panoramic roof of the car, the Model 3 trunk opening of the original model stage is very small. And if the Model 3's trunk is opened in rain or snow, the rain and snow that had piled up on it will slip into the trunk. However, Musk has made it clear: "We are now working on expanding the design of the back box opening of the Model3 and allowing the trunk to open enough space in the future."

4 Is the front face of Model 3 ushered in design changes?

At present, the front face design method of Model 3 seems to have received mixed feedback from consumers. Some consumers are very satisfied with this design, but there are also many consumers who think that it is ugly. However, according to Musk's interaction with netizens on Twitter, the front face of Model 3 has already ushered in adjustment after the press conference, but we can't see its true face for the time being.

5. Will Model 3 launch a full-time four-wheel drive version?

Musk said that the Model 3 Standard Edition is equipped with a common two-drive transmission system, but the company will also introduce a four-wheel drive version for consumers.

"In order to make the Model 3 price as close to the people as possible, the car will come standard with a single-motor two-drive transmission system, but we will also introduce a dual-motor four-wheel drive option," Musk wrote.

6. Does Musk expect Model # to be so hot?

Even Tesla's most active supporters probably didn't expect the model to be so hot, and the company received more than 325,000 Model 3 orders in a week. So the question now becomes whether Tesla can deliver to customers on time. After all, no consumer is willing to wait until 2020 to get their car.

In this regard, Musk said: "Tesla needs to rethink its own production planning model." At the same time, he also said that this sales performance far exceeded his expectations. It is worth mentioning that before the product launch conference, Musk had expected the number of the model to be only between 62 and 125,000.

The Taihang Jiaxin charger is controlled by a solid-state thyristor with electronic sensing and monitoring functions. The main function of the charging system is to charge the battery without supervision while providing a continuous load. The charging characteristic is a constant potential with a current limit. The charger rectifier circuit provides 100% of the rated current, while the float/boost charges a group of lead-acid batteries. The system is also suitable for maintenance and non-maintenance operations.

114

20063

19156

Battery Charger

Battery Charger,Lipo Battery Charger,Hf Battery Charger,Three Stage Battery Charger

Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , https://www.chargers.be