Installation process 1 Millet box (TV) and computer with the same router to connect → 2 download sofa TV wizard and unzip (XP system needs to install another NET3.5) → 3 into the millet settings open unknown source options and record IP address information → 4 sofa TV Wizard dialog box Enter the IP of the millet box (television) and enter the screen verification code as prompted → 5 Complete the installation
Steps
1, Click to download the sofa TV wizard (or enter the sofa TV elf official website http://download)
Note: Windows XP system must first install net.3.5, NET.3.5 download address: Download Now
2, enter the millet system, enter the settings interface, find the account and security, set the unknown source option is set to open, and set up the meter linked security settings;
3. Take the wireless WIFI connected network as an example to view the IP address information of the millet box/TV: Enter the wireless connection → Connection Settings → Wireless Network → Wireless Network Settings to view the IP address; (below)
4, on the computer, will download the good sofa TV Elf installation package extract, double-click the sofa TV wizard, enter the IP address of millet equipment, point installation;
5. Record the verification code of the screen casting artifact displayed on the TV.
6. Enter the verification code of the God screen artifact displayed on the TV on the computer and continue the installation;
7, wait a moment, complete the installation;
If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the official QQ group below.
Our fibre optic Patch Cord are used to connect high speed and legacy networks like Gigabit Ethernet,Fast Ethernet and Ethernet.The patch cords are terminated with standard connector which gives optimum optical performance.A Fiber Optic Patch Cord is constructed from a core with a high refractive index, surrounded by a coating with a low refractive index, that is strengthened by aramid yarns and surrounded by a protective jacket. Transparency of the core permits transmission of optic signals with little loss over great distances. The coating's low refractive index reflects light back into the core, minimizing signal loss. The protective aramid yarns and outer jacket minimizes physical damage to the core and coating.
Ordinary cables measure 125 µm in diameter (a strand of human hair is about 100 µm). The inner diameter measures 9 µm for single-mode cables, and 50 / 62.5 µm for multi-mode cables.
The development of "reduced bend radius" fiber in the mid-2000s, enabled a trend towards smaller cables. Each unit of diameter reduction in a round cable, produces a disproportionate corresponding reduction in the space the cable occupies
Fiber Optic Patch Cord
Fiber Optic Patch Cord,Drop Cable Patch Cord,Mode Conditioning Patch Cord,Duplex Patch Cord
Chengdu Xinruixin Optical Communication Technology Co.,Ltd , https://www.xrxoptic.com