August 8, 2013- ON Semiconductor (Nasdaq: ONNN) , which promotes energy-efficient innovation, has significantly expanded its AEC-Q100 and AEC-Q101 qualification certification standards for strict automotive applications Device lineup.
The continuous improvement of automotive electronic components makes designers need more components that have passed AEC-Q certification and provide strong physical and electrical performance to meet the strict working environment requirements of passenger car systems.
According to the information and analysis of the market research company IHS, the average semiconductor component value of each high-end car is 336 US dollars, which includes integrated circuits (ICs) and discrete components for advanced driver assistance systems, power systems, bodywork and infotainment systems . The IC component value of the infotainment system alone is about $ 52 per vehicle at the original equipment manufacturer (OEM) system level, and about $ 81 per vehicle including the aftermarket system.
Luca De Ambroggi, senior automotive electronics analyst at HIS, said: "In recent years, as the overall automotive electronics component has risen, the average semiconductor component in each car has been rising rapidly and is expected to continue to increase. The number of standard ICs in high-end vehicles is about 5,000 to 6,000. The quality of semiconductor components for automotive applications is a key requirement. The industry ’s goal is to achieve a defect rate of zero (0 ppm) per 1 million components. "
Latest Products
The first new product released by ON Semiconductor is the 100% "Avalanche" energy test of the NVMFS single and NVMFD dual N-channel logic level power MOSFET series. These devices provide a combination of low on-resistance and high current capability while minimizing conduction losses, ensuring strong load performance for use in strict automotive powertrain, safety and body control module applications, including direct fuel injection and airbags , Automotive air conditioning (HVAC) and hybrid electronic systems. These devices use a small footprint, low height SO-8FL package, compared to the traditional DPAK package saves more than 50% of the board space, and power processing energy efficiency is similar.
The new NUP2115LT1G receiver ESD protection diode is designed to protect FlexRayTM transceivers from electrostatic discharge (ESD) and other harmful transient voltage events, provides bidirectional protection for each data line, and is designed to provide the highest possible signal Completeness. The NUP2115LT1G is packaged in a compact SOT-23 package, providing system designers with a way to enhance system reliability and exceed strict electromagnetic interference (EMI) requirements. Due to the high-speed nature of the in-vehicle network, the FlexRayTM standard requires low capacitance protection of 20 picofarads (pF) and a data line capacitance deviation of ± 2%; NUP2115LT1G far exceeds FlexRayTM
The standard provides the industry's largest stray capacitance of 10 pF, with a capacitance matching of 0.26%.
The company's NSV1C series certified by the automotive industry, SOT-23 and SOT-223 package 100 V, 2 A PNP and NPN ultra-low saturation voltage (VCEsat), large source current bipolar transistor provides extremely high energy efficiency, helping to reduce the demand for automotive batteries To the lowest. Typical applications include instrument panel modules and engine control units (ECUs) for direct fuel injection. The NSV1V series devices complement the company's wide range of digital transistors that meet automotive application requirements, and include rated 50 V, 100 mA devices with impedance values ​​ranging from 1.0 kΩ to 100 kΩ. These devices are available in 7 package types, including single, dual, NPN, PNP and complementary devices.
ON Semiconductor also introduced the NCV857x and NCV87xx series of high-performance post-regulated low-dropout (LDO) regulators, providing enhanced performance and an extended operating temperature range from -40 ° C to + 125 ° C. These LDOs are used in infotainment systems, security, lighting, and small motor electronic control units; among them, low noise and low power supply rejection ratio (PSRR) are essential to enhance system performance. These new devices are ideal for Bluetooth applications where low noise performance is critical.
Finally, ON Semiconductor has also introduced several series of automotive-grade (Level 1) serial EEPROMs that provide an extended operating temperature range of -40 ° C to + 125 ° C. The CAV24Cxx I2C bus and CAV25Cxx SPI bus interface serial EEPROM series provide densities from 1 Kb to 1 Mb. These products are produced by ON Semiconductor using silicon processes with geometric dimensions as low as 0.18 µm, and provide industry standard SOIC and TSSOP automotive grade packages. CAV93C86 (16 Kb) will be the first product launched in the serial EEPROM series device of Microwire bus interface.
About ON Semiconductor
ON Semiconductor (Nasdaq: ONNN) is committed to promoting innovation in energy-efficient electronics and enabling engineers to reduce global energy use. The company's comprehensive lineup of energy-efficient power and signal management, logic, discrete and customized solutions helps customers solve their unique design challenges in automotive, communications, computers, consumer electronics, industrial, LED lighting, medical, military / aerospace and power applications. The company operates a sharp, reliable, world-class supply chain and quality projects, and operates business networks including manufacturing plants, sales offices, and design centers in key markets in North America, Europe, and Asia-Pacific. For more information, please visit http: //.
The bulbs are specially designed for forklift. The supply voltage of halogen lamp is usually 48V. Fork lift is an industrial transport vehicle, which refers to various wheeled transport vehicles for loading and unloading, stacking and short-distance transportation. ISO/TC110 is an industrial vehicle. Often used for transporting large items of storage, usually using a fuel engine or battery. Industrial handling vehicles are widely used in ports, railway stations, airports, storehouse, factory workshop, warehouse, distribution center and distribution center, etc., in the cabin, car, and the container pallets of goods loading and unloading, handling, is essential to tray transportation, container transportation and equipment. Forklift plays a very important role in the logistics system of enterprises, which is the main force in material handling equipment. It is widely used in the stations, ports, airports, factories, warehouses and other sectors of the national economy. The forklift was developed during world war II.
Auto Fork Lift Light Bulb
Auto Fork Lift Light Bulb,Flashing Strobe Beacon Light,LED Rear Work Light,Driving Light
Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com