DC servo amplifier circuit schematic

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

GW MB10F 0.8A 1000V rectifier bridge

A servo amplifier, also called a servo driver, is a controller used to control a servo motor. Its function is similar to that of a frequency converter acting on a common AC motor. Mainly used in high precision positioning systems. It is currently a high-end product of transmission technology. At present, the mainstream servo amplifiers use digital signal processor (DSP) as the control core, which can realize more complicated control algorithms and realize digitalization, networking and intelligence. The power device generally adopts the driving circuit designed with the intelligent power module (IPM) as the core. The IPM integrates the driving circuit internally, and has fault detection and protection circuits such as overvoltage, overcurrent, overheat and undervoltage, and adds soft in the main loop. Start the circuit to reduce the impact of the startup process on the drive. The power driving unit first rectifies the input three-phase electric power or the commercial power through a three-phase full-bridge rectifying circuit to obtain a corresponding direct current power. After rectifying the three-phase electric or commercial power, the three-phase permanent-magnet synchronous AC servo motor is driven by the three-phase sinusoidal PWM voltage inverter. The entire process of the power drive unit can be simply the process of AC-DC-AC. The main topology circuit of the rectifier unit (AC-DC) is a three-phase full-bridge uncontrolled rectifier circuit.