Hitachi launched LED bulbs with the equivalent of 100W incandescent lamps in July

Posted on

Hitachi Electric Co., Ltd. announced that its E26 lamp mouth ordinary large light angle LED bulb is the first in Japan to achieve the same amount of light as a 100W incandescent bulb (1520Lm). It will be available on July 13.
By adopting high-efficiency LED modules, and respectively utilizing the heat dissipation area of ​​the slit portion of the "gap structure" which efficiently dissipates the heat of the LED module, it is expanded to about 1.3 times of the original product, and further expanding the LED light diffusion range and reducing the illumination of the lampshade. Technologies such as the “light diffuser” achieve brightness and illumination range comparable to 100W incandescent bulbs. Compared with the 100W incandescent bulb, the power consumption is about 1/6, and the rated life is 40 times, which is 40,000 hours.
LED bulbs consume only 15W, so fixtures that use 60W and 40W incandescent bulbs can also be used. According to the company, these lamps can provide the same brightness as a 100W incandescent bulb, so you can easily increase the brightness and save energy by simply replacing the incandescent bulb.
The new product has a protection function that automatically controls the temperature (the brightness also drops) when the temperature and humidity rise, so it can also be used for closed lamps. However, it cannot be used outdoors. Dimmers are not yet supported. In addition, the size is 60 mm in outer diameter and 123 mm in length, which is one turn larger than the 100 W incandescent bulb. Therefore, it is considered that there may be cases where the existing lamps cannot be used due to size problems.
On the same day, Hitachi will also launch LED bulbs with brightness equivalent to 80W incandescent bulbs (1160Lm). The product number is "LDA15L-G". Other parameters such as size and life are basically the same as LDA15D-G. The price is open.

Electrical Wire is used to bear mechanical loads or electricity and telecommunications signals. Usually the insulation adopts XLPE/PVC. The conductor can be made of copper or aluminum. The basic structure of electrical wire is conductor cladded by insulation. For shielding installation wires, there is an additive shielded layer. In terms of shape, this wire can be classified into flat wire, round wire & flexible wire. The wire can be flame retarded, fire resistant, zero halogen & low smoke according to different needs.  the wire has a large electricity transmission capacity and decent mechanical strength. It presents super performance when acted by mechanical force. This wire finds its application in household appliaces, power transmission and distribution lines, instruments, lighting & other electrical equipment.

 

Standard: GB                              Jacket: PVC

Conductor: copper/aluminum             Cores: single core or multicores

Insulation: XLPE/PVC                     Conductor Type: solid/stranded

 electrical wires single core or multicore

Advantages:

  • High Insulation
  • Resistance to breakage
  • Large tensile strength
  • Good moving performance
  • Good softness
  • Excellent elasticity and stickiness
  • Resistance to skin effect
  • Long life span
  • Corrosion & abrasion resistant
  • Decent mechanical strength
  • Chemical & acid resistance
  • Excellent elasticity and stickiness

 electrical flexible round wires

Application:

  • Household appliances
  • Control and power circuits
  • High rising buildings
  • Fire alarm systems
  • Instruments
  • Electrical equipment
  • Underground tunnels
  • Power transmission and distribution lines
  • And many more...

 round electrical wires

Welcome to visit our factory to learn more about us. If you have any questions, please feel free to contact us. 

Electrical Wire

Electrical Wire,Electric Copper Wire,Electric Cable Wire,Gauge Electrical Wire

Fujian Lien Technology Co.,Ltd , http://www.liencable.com