Telemedicine is a new way of distinguishing medical care from traditional medicine. It is also a new manifestation to help people improve their quality of life. Through the use of wireless technology, people and doctors can establish a new relationship, so that patients can go to the hospital in addition to the doctor. For health consultation, you can also get the patient's condition online to solve the patient's problem in the most effective time.
Telemedicine is becoming a new way to help people improve their quality of life, and the widespread use of wireless technology has brought unprecedented challenges to the interaction of personal health and medical devices. This kind of challenge stems from the need to communicate with some wireless-enabled instruments and end devices. To meet this demand, it is important that all devices communicate using the same protocol, in order to keep the data intact. Sex. In this article, we'll discuss some of the general issues related to wireless technology and the techniques for choosing the right wireless standard for different situations.
As one of the fastest growing interdisciplinary areas today, telemedicine uses a variety of technologies to provide health and medical information through remote and close-range wired and wireless networks. Telemedicine has become a catalyst for innovation in information services in the health care arena. It allows patients, doctors and other suppliers to have new ways of communicating, enabling patients with chronic conditions to achieve higher quality of life at lower cost, such as cardiovascular disease, diabetes, chronic respiratory diseases and cancer patients. After the advent of short-range wireless connectivity technology, telemedicine technology still plays a key role in the health, fitness and sports markets. The following two examples can help better explain the impact of wireless connectivity technology on telemedicine:
For example, a jogger can carry a variety of sensors to monitor his life indicators (including heart rate, blood pressure, SpO2), skin moisture and other sports performance, such as: running speed, calories burned and step size. These parameters can be collected during a run on a mobile device (eg, a watch or smartphone, etc.) and then downloaded or sent to his personal computer, coach or doctor. After analyzing the data, the doctor or the coach can propose training improvement suggestions to improve the jogger's exercise endurance and effectiveness.
For example, an ambulance that performs a rescue mission at the scene of an accident, an emergency medical team (EMT) who is required to visit the accident can start treatment on the way back to the hospital, and immediately begin to monitor various vital signs of seriously injured people and make a diagnosis of the injury. Diagnose and send important data and diagnostic details to the emergency room of the hospital. Sending these data in advance will allow nurses and doctors to better prepare for the treatment. Once the injured person arrives at the hospital, they can immediately implement the correct treatment, saving a lot of precious time and ultimately saving lives.
These two examples demonstrate the important role that wireless connectivity solutions can play and play in the widely used telemedicine field. It can:
Collect data more accurately, frequently, and at low cost
Give patients and healthcare professionals a new way to connect
ConTInua Health Alliance
The Continua Health Alliance is an international, not-for-profit, open industry organization comprised of more than 230 companies that address and address the versatility of telemedicine products and services in application and deployment. Their mission is to build an ecosystem of personal health care that empowers consumers and organizations to better manage their health. The Alliance is not responsible for the development of specific new communication standards, but rather selects some existing standards and then develops general guidelines. To successfully solve the versatility problem, you need to complete the following three important refinements:
Chronic disease health management
Medical and health
Extension of individual life
Figure 1 shows an architecture defined by the Continua Health Alliance.
Figure 1 Continua end-to-end system architecture
This end-to-end system architecture consists of the following four main parts:
Personal health care equipment: Monitor basic vital signs such as blood pressure, weight, pulse, oxygen levels, and blood glucose levels, and send them over a wired or wireless connection.
Integrated Manager: Enables personal health devices to record data in the form of an electronic medical record (HER) for viewing by the home and/or hospital at any time. This integrated manager can utilize smart phones, personal computers or other specialized devices.
Health Service Center: Store and analyze patient-related information in a centralized manner. It can be a doctor's office, home, or health care facility.
Health record: used to store collected data. Forms include personal health record (PHR) or electronic medical record (HER)
Four kinds of networks are defined in this integrated management architecture. We will mainly introduce personal area network (PAN) and wide area network (WAN).
Since PAN is characterized by low power consumption (generally a battery), we chose Bluetooth reg; and ZigBeereg; these two technologies are the wireless standards for future generations of Continua compatible telemedicine systems. Bluetooth technology is typically used for connections between mobile integrated managers (eg, smart phones) and sensors or medical devices; ZigBee is used for wireless networking of low-power sensors, such as sensors that allow patients to be independent at home. PAN networks typically connect from 1 meter to 10-20 meters, and most devices connected to the PAN network are battery powered.
When you need to transfer data over longer distances (greater than 30 meters) and have a larger bandwidth, it is best to use wide area network (WAN) access. The Continua Alliance has chosen the w3c standard for WAN, which can be implemented using any IP-type network. This allows solutions such as Wi-Fi and most 3G network services to transfer data from the manager/hub to the back-end software.
It should be noted that only when a product recommended by the Continua Health Alliance is required, authorization is required to select a specific network access standard. If Continua certification is not required, the system/product architecture can choose other network access standards such as IEEE 802.15.4, ANT, 6lowPAN or even some proprietary radio standards in the 2.4 GHz or 900 MHz band.
Some important metrics when choosing a wireless connection standard
Choosing a particular network cable connection standard or technology is the result of a series of compromises and optimizations. We can compare various wireless standards based on a number of parameters, such as specifying data rate, network topology, transmission distance, and so on. These parameters are metrics. Figure 2 shows most of the parameters compared when selecting a wireless standard for telemedicine and medical applications. The metrics listed below are not all related to a particular application, and the number and type of metrics depends on the specific end application.
Figure 2 Parameters to consider when comparing different network connection standards
Table 1 summarizes the data rates required for physiological information or vital signs collection for many applications, including chronic disease management or health management. Blood pressure monitoring requires a data rate of 1-10 kbps. If the application involves sending a still image, a data rate of 2 Mbps is required. Product developers need to know which technology can support the data rate required by the application to transfer data.
The frequency of work is another important metric we need to consider. The spectrum used to transmit data is regulated by the main government regulatory authority. The spectrum requirements and regulations will vary depending on the region and market in which the product is targeted (eg hospital or general consumer). In addition, the network topology can have an impact on the software stack size and current consumption. This is especially true for applications that use protocols that require a full mesh topology (eg ZigBee).
Table 1 Data rates of different monitored biological signals
Figures 3, 4, and 5 compare several wireless network connection standards using transmission distance and data throughput parameters. Figure 3 shows that Bluetooth technology and the ANT protocol are the most suitable non-proprietary standards for body area networks (BANs), which require very short distances and low power consumption. Figure 4 shows that Wi-Fi is probably the most suitable network connectivity standard for high data throughput. Figure 5 shows the battery types required for different standards. From these figures, we can clearly see that Wi-Fi requires more power than several other connection methods.
Figure 3 Communication distance of various technologies.
Figure 4 Data throughput of various technologies
Figure 5 requirements for various technologies
in conclusion
There is no doubt that telemedicine has greatly benefited from the widespread use of wireless technology, revolutionizing the way healthcare services are delivered. However, the rapid development of wireless technology has also brought versatility between different wireless devices and devices, making it difficult to choose the right wireless standard. There are many wireless standards that can be used in telemedicine applications. It is important for engineers and developers to choose a standard that is best suited for a particular end application. In this process, technology implementation has indeed brought a more relaxed and enjoyable life to patients, doctors, healthcare providers and all other health care ecosystem participants.
power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively
Product features
High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material
Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm
The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A
Power+ Signal Power Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com