The development of LED lighting market is getting hotter and hotter. From the current market point of view, LED lighting industry will soon usher in a period of rapid development of the industry. From a foreign point of view, the first areas that are currently being promoted are also in 2, 3, but LED street lights are very cautious. Therefore, the boss who is making blind LED street lights is likely to become a "revolutionary pioneer," while the other two markets will instead cultivate the "leaders" of many industries.
The hottest LED on the mainland is the LED street light. Under the impetus of the Ministry of Science and Technology, it has been promoted with astonishing enthusiasm. Many people have entered this market and appear to be the first lighting field. At present, there are 21 pilot cities across the country, with an estimated 1 million, and the Ministry of Science and Technology plans to approve 50 cities next year, which is expected to reach 2 million baht. This is Chinese characteristics! It can be considered as the speed of creating China! However, the overall product maturity is worrying; it may also be In the field of lighting, the first market to be ruined was to repeat the suspicion of the early stage of the LED barrier light. Is the bubble more serious? Although it is very prosperous and lively, it is foreseeable that after the government takes money, it will eventually take 2-3 years. It is perhaps the ultimate goal of the government to cultivate a group of good LED optoelectronic technology companies.
LEDT8 tube applications, from the current market product program perspective, has been close to the introduction of commercial products, is the first to be a mature market to promote. At present, it can be used as a market for parking lots, shopping malls, advertising backlights, etc., and the current product cost and selling price are basically close to the point of commercial application (150). A good product has a mature solution in terms of optics, heat dissipation, and power handling. The product is also the closest to commercialization. Of course, there are still a lot of low-quality products in the market. This is the biggest challenge at the moment. With the introduction of the US Energy Star and relevant European Union standards, I believe that the above issues will be greatly improved, that is, the commercialization of T8-LED will begin.
LED lamp cup, should be concerned, the lamp cup is one of the first areas of LED lighting began, has been mainly because the product program is not mature enough, it is difficult to large-scale application. From the previous die-casting to aluminum extrusions, the products that can really solve the problem of heat dissipation and power supply have not yet been seen. That is, there is no product solution that can be applied commercially. Although the cost of LED itself has dropped significantly, the market has not been a big improvement. Recently, there have been reports that some foreign countries have introduced products that can solve the lamp cup heat dissipation and power supply. If this is the case, the market for light cups will follow T8-LED soon and will soon rise. It is also one of the first areas in which LED has the hope of becoming bigger.
At present, the hope of this subdivided area can be seen from the fact that Wal-Mart has begun to replace the traditional fluorescent lamp with the T8-LED in the world.
As far as the current level of industry development is concerned, LED lighting has not yet had enough capacity to break the traditional lighting concept and it still remains on the replacement line. In the replacement line, LED lighting must also rely on government policy guidelines. In other words, although some of LED lighting has developed to a sufficiently mature level, it is still at the embryonic level of an initial stage compared to the entire market.
Fiberglass Duct Rodder are composed of fiber glass rod which was extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer(High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating.), which make duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, which make them safe for use in cable occupied duct.
And moving type fiberglass duct rodder will equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving.
Features and Benefits:
-
Light weight, durable, resistance to acid, alkali, aging resistant, corrosion resistant.
2-High tensile strength and bending properties, which make it to go through narrow pipes easily.
3-Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. Its usability will not be affected by temperature.
4-Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability.
5-Cover was coated with long-term UV-resistant polyethylene.
6-Its surface has the advantage of smooth, wear-resistant and long service life.
7-There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, clear writing, waterproof, anti-ultraviolet, it can be still clear even after using many times.
8-There are several kinds of colors for the rod for your chosen.
Fiberglass Rodder,Fiberglass Duct Rodder,Fiberglass Conduit Rodder,Duct Push Rod,Fiberglass Duct Rod,Conduit Rod
NINGBO BEILUN TIAOYUE MACHINE CO., LTD. , https://www.spool-manufacturer.com