First, use a plastic knife to loosen the decorative panels on both sides of the car's internal gear, then remove the decorative panel, and then remove the Phillips screws on both sides of the gear, so that the inside of the storage box can be pulled out. However, in the process of pulling the reserve box, it should be noted that since the inside of the reserve box has a shackle to fix it, it is necessary to pay attention to loosening the shackle and pulling the reserve box first during the removal process.
Then, use the rubber knife to remove the decorative panel of the gear, and then pull it out with a screwdriver, then use a screwdriver to take out the left and right corner screws and hex screws in the CD, so that you can use the plastic knife to control the CD. The decorative panel is removed, then the CD is removed and the tail wire connecting it is unplugged.
Finally, install the pre-purchased DVD navigation in this place, and the wiring at the end of the street, DVD navigation can be used.
Only correct and strict DVD navigation installation according to the above steps, go to some DVD navigation brand stores to buy DVD navigation , in order to ensure the effective use of DVD navigation , if you do not install, it is best to go to some auto repair shop, please professional people Installation, so it is safer.
Sand And Dust Test Chamber,Lock Dust Test Machine,Dustproof Test Box,Seal Dust Test Equipment
Wuxi Juxingyao Trading Co., Ltd , https://www.juxingyao.com