UG4.0 installation steps and methods
After I have installed UG many times, I can get it. pay attention:
1 Install UG must be in the root directory of the disk.
2 Pay attention to whether the change of the decrypted file matches the name of your computer
3 Follow the steps to install the decrypted file first, and then install NX3.0 or 4.0, and then convert the additional steps:
Installation method 1: UGNX4.0 installation method:
Notice: This software can only be used under WINDOWS NT, WIN2000, WINDOWS XP, WINDOWS2003. The software is available in multiple languages, and the simplified Chinese version can be installed through language selection during installation. It is definitely the official simplified Chinese version.
installation method:
1. Find your machine's "network logo" (computer name). The method is that the mouse clicks My Computer on the desktop ---> Properties (reverse key) ---> Network Logo ---> Complete computer name, copy down the name for future use. Of course, if you already know the "network identity" of your computer, this step is not necessary.
2. Copy the UG4.0 directory on the CD to your hard drive, enter the directory, and remove the read-only attribute of the file ugnx4.lic under crack (mouse click the file-> anti-key-> attributes, put " (The "read-only" checkmark is removed). Open nx4.lic with Notepad, and replace jf in line 1 with the network ID (computer name) of your machine. ), Save it for future use after modification.
3. Enter the CD-ROM ugnxflexlm directory, run setup, during the installation process you will be prompted to find the license file, click NEXT will make an error, then use Browse (Browse) to find the UGx4.lic file stored on your hard disk. Continue to install until the end, the directory path should not be changed, the machine will do by default, (it can also be placed in other disks).
4. Enter the CD UGNX4.0 directory, run setup to start the installation, and select the custom installation method, select all the modules, then go down, the language selection screen will appear, please select Simplified Chinese (Simplified Chinese version), follow the prompts to install step by step Until the end. (It is best not to change the installation directory path)
5. Before running UGNX, be sure to run lmtools.exe to start the service program. You can run it from the program bar; you can also go to C: \ Program Files \ UGS \ Unigraphics NX \ UGFLEXLM \ lmtools.exe to run. Then, run Unigraphics again, everything is OK, hehe. If you forget to run lmtools.exe, there will be an error message that the server cannot be found, you can not enter UGNX, then you do not want to find me !!!
6. Although your 4.0 can be used now, but you still lack data input and output, please copy the 8 files in the NX4.0 file conversion folder to the C: \ Program Files \ UGS \ NX 4.0 directory OK ~~! ! !
Note: If it cannot be opened, please follow the steps below
You can run lmtools.exe from the program bar; you can also enter C: \ Program Files \ UGS \ Unigraphics NX \ UGFLEXLM \ lmtools.exe to run. Then, run Unigraphics again, everything is OK, hehe. If you forget to run lmtools.exe, you may get an error message that the server cannot be found.
5.08Mm Ribbon Connector,Pressure Connector,Electrical Connector,Wire-To-Board Connector
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiwafer.com