ZTE ZXV10 B860AV1.2 through a U disk to install third-party applications to watch TV

Posted on

Preparation tools: TTL data cable, U disk, computer

Tip: First of all buy a good TTL data line, find the seller to drive, install the driver can operate the following steps;

Putty Download: putty.zip (280.1 KB, Downloads: 0)

One, ZTE ZXV10 B860AV1.2 connected TTL order


2. Right-click My Computer - Properties - Device Manager - Port - COM "X" (X is the last digit) - Properties - Port Settings - Change to "115200" - OK;


Third, download the software to the U disk, and then modify the file name (refer to the following modifications), then insert the U disk ZTE ZXV10 B860AV1.2 box any USB interface;

Shafa1.apk - sofa butler desktop (download: http://app.shafa.com/apk/shafazhuomian.html)

Shafa2.apk - Sofa Butler (Download: http://)

Fourth, open putty.exe

According to the order in the figure, the number behind the COM can be set according to the digital input of your computer. After the setting is completed, select open, then the set-top box is powered on and the box starts. At this time, putty will start running the code. (Note: If you do not run the code, set the box. On the TTL line RX and TX swap about);


There are two ways to install, copy method and direct install method (only one method is used):

A, copy method:

Root@n200:/ # cp /storage/external_storage/sda1/shafa1.apk /data/app Installing a Third-Party Desktop

Root@n200:/ #cp /storage/external_storage/sda1/shafa2.apk /data/app Install third-party application management

Root@n200:/ # cd /data/app Enter ls after carriage return to see if they have been copied

B, direct installation method:

Root@n200:/ # adb install /storage/external_storage/sda1 /shafa1.apk Installing a Third-Party Desktop

Root@n200:/ # adb install /storage/external_storage/sda1 /shafa2.apk Install third-party application management

Fifth, finally set the startup desktop

Root@n200:/ # am start com.shafa.tvlauncher

As long as no feedback information not, to this software has basically been installed, you can exit the connection to the TV, and if the feedback does not indicate that the startup failed, of course, it is best to insert a TV to see if you start the sofa butler desktop.

The solution to feedback not is to repeat steps A or B and 5.

ZTE ZXV10 B860AV1.2 is restricted in some areas. After entering the desktop, other software cannot be directly installed. The system limits the online installation of third-party APPs.



After successful cracking, enter the sofa butler market, if prompted "network access error" please connect wifi external network re-enter the sofa butler market;

HNB Device

"Non-burning, nicotine for users, low tar content. As the heating temperature (below 500℃) is lower than the combustion temperature of traditional cigarettes (600-900℃), the harmful components produced by tobacco high-temperature combustion pyrolysis and thermal synthesis are reduced, and the release amount of side-flow smoke and environmental smoke (second-hand smoke) is also greatly reduced."

Heating non - combustion products are electronic devices containing tobacco. When you heat them, they produce a nicotine-containing vapor that you can inhale.

They are different from traditional cigarettes and work by heating tobacco to a very low temperature. Tobacco is heated to 350 ° C in a heat-incombustible device, while traditional cigarettes burn at up to 900 ° C.

Still, the temperature at which non-combustion products are heated is high enough to vaporize and inhale harmful chemicals.

Although both are electronic devices, heated non-combustible products are also different from e-cigarettes or steam devices. These usually use chemical liquids and do not necessarily contain nicotine. E-cigarettes tend to heat liquids to around 250 degrees Celsius to produce vapor.

Hnb Device Oem,Hnb Device Patent,Hnb Device,Hnb Device For Sale

Shenzhen MASON VAP Technology Co., Ltd. , https://www.e-cigarettefactory.com